Town of Lexington

Come see what country living is all about. 

 
   
 

 

 
   
   
 

Consumer Confidence Report 2014

 

Consumer water report 2014

 

Is my water safe?

We are pleased to present this year's Annual Water Quality Report (Consumer Confidence Report) as required by the Safe Drinking Water Act (SDWA). This report is designed to provide details about where your water comes from, what it contains, and how it compares to standards set by regulatory agencies. This report is a snapshot of last year's water quality.  We are committed to providing you with information because informed customers are our best allies.

 

 

Do I need to take special precautions?

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Water Drinking Hotline (800-426-4791).

 

 

Where does my water come from?

The Town of Lexington has one ground water well it uses to provide water.

 

 

Is my water safe?

We are pleased to present this year's Annual Water Quality Report (Consumer Confidence Report) as required by the Safe Drinking Water Act (SDWA). This report is designed to provide details about where your water comes from, what it contains, and how it compares to standards set by regulatory agencies. This report is a snapshot of last year's water quality.  We are committed to providing you with information because informed customers are our best allies.

 

 

Why are there contaminants in my drinking water?

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency's (EPA) Safe Drinking Water Hotline (800-426-4791).

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells.  As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity: microbial contaminants, such as viruses and bacteria, that may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife; inorganic contaminants,


such as salts and metals, which can be naturally occurring or result from urban stormwater runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming; pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses; organic Chemical Contaminants,

including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems; and radioactive contaminants, which can be naturally occurring or be the result

of oil and gas production and mining activities.  In order to ensure that tap water is safe to drink, EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems.  Food and Drug Administration (FDA) regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

 

 

How can I get involved?

City council meetings are the 2nd Tuesday of each month at 7pm, meetings are held at city hall,

425 F St.

 

 

Other Information

On 7/25/14 we took a Nitrate sample and it came back with good results. We came back with

0.9mg/L 0.5 being the minimum and 10 being the maximum. The town monitored the system each month for total coliform with no violations for the 12 months of 2014.

 

 

Additional Information for Lead

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. Town of Lexington is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

 

 

Water Quality Data Table

 

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of contaminants in water provided by public water systems. The table below lists all of the drinking water contaminants that we detected during the calendar year of this report. Although many more contaminants were tested, only those substances listed below were found in your water. All sources of drinking water contain some naturally occurring contaminants. At low levels, these substances are generally not harmful in our drinking water. Removing all contaminants would be extremely expensive, and in most cases, would not provide increased protection of public health. A few naturally occurring minerals may actually improve the taste of drinking water and have nutritional value at low levels. Unless otherwise noted, the data presented in this table is from testing done in the calendar year of the report. The EPA or the State requires us to monitor for certain contaminants less than once per year because the concentrations of these


contaminants do not vary significantly from year to year, or the system is not considered vulnerable to this type of contamination. As such, some of our data, though representative, may be more than one year old.  In this table you will find terms and abbreviations that might not be familiar to you.  To help you better understand these terms, we have provided the definitions below the table.

 

 

 

 

 

Contaminants

MCLG or MRDLG

MCL, TT, or MRDL

 

 

Your

Water

 

 

Range

 

 

Sample

Date

 

 

 

Violation

 

 

 

Typical Source

Low

High

Inorganic Contaminants

 

Nitrate [measured as

Nitrogen] (ppm)

 

 

10

 

 

10

 

 

0.9

 

 

NA

 

 

 

2014

 

 

No

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits

 

 

Arsenic (ppb)

 

 

0

 

 

10

 

 

1.97

 

 

NA

 

 

 

2013

 

 

No

Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes

 

 

Barium (ppm)

 

 

2

 

 

2

 

 

0.0408

 

 

NA

 

 

 

2013

 

 

No

Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits

 

Chromium (ppb)

 

100

 

100

 

1.83

 

NA

 

 

2013

 

No

Discharge from steel and pulp mills; Erosion of natural deposits

 

 

Fluoride (ppm)

 

 

4

 

 

4

 

 

0.365

 

 

NA

 

 

 

2013

 

 

No

Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories

 

 

Selenium (ppb)

 

 

50

 

 

50

 

 

1.63

 

 

NA

 

 

 

2013

 

 

No

Discharge from petroleum and metal refineries; Erosion of natural deposits; Discharge from mines

Sodium (optional) (ppm)

 

 

MPL

 

21.9

 

NA

 

 

2013

 

No

Erosion of natural deposits; Leaching

 

 

Contaminants

 

 

MCLG

 

 

AL

Your

Water

Sample

Date

# Samples

Exceeding AL

Exceeds

AL

 

 

Typical Source

Inorganic Contaminants

 

Lead - action level at consumer taps (ppb)

 

0

 

15

 

15

 

2013

 

0

 

No

Corrosion of household plumbing systems; Erosion of natural deposits

Copper - action level at consumer taps (ppm)

 

1.3

 

1.3

 

1.3

 

2013

 

0

 

No

Corrosion of household plumbing systems; Erosion of natural deposits

 

Unit Descriptions

Term

Definition

ppm

ppm: parts per million, or milligrams per liter (mg/L)

ppb

ppb: parts per billion, or micrograms per liter (µg/L)

NA

NA: not applicable


 

ND

ND: Not detected

NR

NR: Monitoring not required, but recommended.

 

Important Drinking Water Definitions

Term

Definition

 

MCLG

MCLG: Maximum Contaminant Level Goal: The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

 

MCL

MCL: Maximum Contaminant Level: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

 

TT

TT: Treatment Technique: A required process intended to reduce the level of a contaminant in drinking water.

 

AL

AL: Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

 

Variances and Exemptions

Variances and Exemptions: State or EPA permission not to meet an MCL

or a treatment technique under certain conditions.

 

 

MRDLG

MRDLG: Maximum residual disinfection level goal. The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

 

 

MRDL

MRDL: Maximum residual disinfectant level. The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

MNR

MNR: Monitored Not Regulated

MPL

MPL: State Assigned Maximum Permissible Level

 

For more information please contact:

 

Contact Name: Michael Hammons

Address:

425 F st.

Lexington, OR 97839

Phone: 541-989-8515